How do you Use Self-fusing Silicone Rubber Tape Correctly?
Time: 2023-09-16 16:17:00     Copyfrom: SuZhou Volsun Electronics Technology Co.,Ltd.

Volsun, as a professional manufacturer of self-fusing silicone rubber tape, we produce both flame retardant type and non-flame retardant type silicone rubber self fusing tape. Our silicone rubber self-adhesive tape has good ductility and insulation properties, excellent aging resistance, ozone resistance, and UV resistance, long service life, and strong covering power. It is mainly used in substations with high flame retardant requirements and exposed copper bars in power plants. Insulation protection for parts, equipment electrical joints, cable joints, and switch cabinet busbars.

The features of self fusing silicone tape are as follows:

1.     Operating temperature: -60℃~+180℃

2.     Standard colors: red, yellow, green, black (other colors can be customized)

3.      The surface of the tape is not sticky to the touch and will not leave any sticky residue after peeling off.

4.      It can produce strong self-adhesiveness in a short period of time. After winding, it will self-integrate into one body and can be sealed and waterproof.

5.     The product can be wound into any shape and is suitable for wrapping various electrical cable joints and intermediate joints

6.      Anti-fouling, anti-corrosion, anti-UV, waterproof, ozone-resistant, anti-aging, suitable for a variety of environments and suitable for outdoor operations.

As for the installation, it’s very easy. You just need to wipe the surface of the object to be protected clean, tear off the isolation film, and wrap half of the silicone self-adhesive tape around the object to be protected, then installation finished.

Just please noted that before installation, the surface of the protected object must be cleaned and free of dirt and debris to prevent impurities from being attached to the tape and affecting the adhesion.

When removing the film and applying it to the protected object, a small amount of film needs to be peeled off, and half of the film needs to be overlapped to ensure the product's protective effect.

Welcome to contact for more details or if any questions!