TechnicalKnowledge
Are you here:Home >

Volsun two pulling way EPDM cold shrink tube for long cables
Time: 2020-12-24 15:50:12     Copyfrom: SuZhou Volsun Electronics Technology Co.,Ltd.

EPDM cold shrink tube are often used in signal tower antenna feeders in the telecommunications industry. With the increase in the number of customers and the continuous expansion of business, the requirements for the length of cold shrink tubeare becoming higher and higher. The use of cold shrink tubing for the cable is very trivial and the effect of the shorter cable is not great. If the cable is longer and a sponge strip is added inside, It’s very inconvenient to use the traditional one-end pulling cold shrink tubing operation. It’s easy to take out the sponge strips in the process of pumping, which will cause waste if it doesn’t shrink. In this case, a two pulling way cold shrink tube has been developed. Here are some picture of the two pulling way EPDM cold shrink tube.


The two pulling way cold shrink tube is made of special raw materials. It can be positioned and then the support corecan be removed. It has the advantages of large shrink ratio,excellent physical and mechanical properties, and resistance to puncture. Suitable for waterproof and moisture-proof sealing of communication and cable connection connectors, insulation and sealing of wire and cable connection, and insulation protection of other types of connectors.


More detail please contact our Sales Team by volsuntube@szvolsun.com


KEYWORD:EPDM cold shrink tbe
RELATED_ARTICLES:
Volsun At EP Shanghai Expo
High Temperature Resistant Fluororubber Heat Shrink Tubing
Welcome to Visit Our Booth (No. N4-4G08) at EP Shanghai Power Expo
What Are The Advantages of PPS Tie Cord?
VOLSUN Heat Shrink Tubing Product Series
How to Choose The Insulated Busbar Heat Shrink Tubing?
Why do we need cable wire line identification?

More>>Contact Uscontact

Consult online

Wechat+86 18963667177
Tel:86-18963667177