FST6031SI Non-flame retardant self fusing tape
- Detailed
Description
Self-fusing Silicone Tape is a convenient, ready to use tape which can be used to make airtight and waterproof seals on many types of materials and applications including electrical connections, hoses, and cables and to reduce vibration of hand tools. It is tear, abrasion, and UV resistant and it withstands exposure to fuel, water, oil, acids, and many solvents. It is a class H Insulator. This product is designed to seal hoses and leaky plumbing, insulate electrical connections, wrap hand tool handles.
Features
- Standard colors: red, yellow, green, black (other colors can be customized)
- The surface of the tape is not sticky to the touch, after peeling off, no sticky residue will be left
- Strong self-adhesiveness can be produced in a short time, and it can be self-integrated after winding, which can be sealed and waterproof
- The product can be wound into any shape, suitable for wrapping various electrical cable joints and intermediate joints
- Anti-fouling, anti-corrosion, anti-ultraviolet, waterproof, ozone-resistant, anti-aging, suitable for various environments, suitable for outdoor operations
Technical Performance
|
Item |
Typical Data |
Test Standard |
|
Tensile Strength |
≥4.0MPa |
GB/T 528-2009 |
|
Elongation at break |
≥300% |
GB/T 528-2009 |
|
Self-adhesive |
＞3.5N/cm |
ASTM D2148 |
|
Dielectric strength |
≥22kV/mm |
GB/T1408.1-2006 |
|
Volume resistivity |
≥1.3×1014Ω·m |
GB/T1410-2006 |
|
Water absorption |
＜0.9% |
GB/T 1034-2008 |
Dimension
|
Size |
Width（mm） |
Thickness（mm） |
Package（M/Roll） |
|
19*0.5 |
19 |
0.5 |
5/ customized |
|
25*0.3 |
25 |
0.8 |
5/ customized |
|
25*0.5 |
25 |
0.5 |
5/ customized |
|
25*0.8 |
25 |
0.8 |
5/ customized |
|
50*0.5 |
50 |
0.5 |
5/ customized |
|
50*0.8 |
50 |
0.8 |
5/ customized |
|
50*1.0 |
50 |
1.0 |
5/ customized |
Note: special size and packaging can be customized upon request
Instructions
Wipe the surface of the object to be protected, tear off the isolation film, and wrap half of the self-adhesive tape on the object to be protected
Finish installation
Precautions
- Before installation, the surface of the object to be protected must be cleaned, free from dirt and debris, so as not to affect the installation and use
- When tearing off the film and attaching it to the protected object, a small amount of tearing off the film is required. Too much film tearing at one time will cause wrinkles and stick to impurities during use, which will affect the use
- When pasting, one-half overlap is required to ensure the protective effect of the product
- The environment should be kept as clean as possible during use to prevent impurities from sticking to the tape and affecting the adhesive force
