Dual Wall Heat Shrink Tubing, 3:1&4:1 Heat Shrink Ratio
Time: 2014-03-07 17:00:35 Copyfrom: SuZhou Volsun Electronics Technology Co.,Ltd.
Description:Dual wall heat shrink tubing (3:1&4:1 Shrink ratio) is a cross-linked polyolefin tube that is extruded with an inner layer of adhesive. Typical applications include environmental sealing of in-line splices, sealing and strain relief of connectors and terminals, abrasion protection and electrical insulation of automotive wiring harness splices and valuable components, fleet & marine sealing & protection and wire bundling etc.
Features
● UL certified
● High shrink ratio
● Flame retardant outer layer, ultraviolet ray proof
●Min. shrink temperature: 70℃
● Min. full recovery temperature: 125℃
● Continuous operating temperature: -45℃~125℃
●Shrink ratio: 3:1, 4:1.
● RoHS compliant
●Standard color:Black
Other colors available on request
|
Properties |
Typical Data |
Test Method |
|
Tensile strength |
≥10.4MPa |
ASTM D 2671 |
|
Elongation |
≥300% |
ASTM D 2671 |
|
Tensile strength after heat ageing |
≥7.3MPa |
158℃×168h |
|
Elongation after heat ageing |
≥100% |
158℃×168h |
|
Longitudinal change |
-8%～+8% |
ASTM D 2671 |
|
Flammability |
Self extinguish in 30 sec. |
AMS-DTL-23053/5 |
|
Dielectric strength |
≥15kv/mm |
IEC 60243 |
|
Volume resistivity |
≥1014Ω.cm |
IEC 60093 |
Technical Data
