Adhesive Lined Heat Shrink Tubefor Automotive Pipe Protection
Time: 2015-05-25 11:17:18     Copyfrom: volsun

Volsun® V-5(2000) Adhesive Lined Heat Shrink Tube is specially made for automotive pipes and fuel metal pipes protection.

Obviously, Adhesive Lined Heat Shrink Tubewith a double-walled tube is divided into inner and outer layers, the outer layer of high pressure low density polyethylene (PE) and ethylene - a mixture of vinyl acetate copolymer (EVA), and the inner layer is a thin highly viscous hot melt sealant.

When heated, through the inner hot melt adhesive, the heat shrink tubing and pipes tightly bonded together, in the middle without any gap. So it means our Adhesive Lined Heat Shrink Tube can greatly improve the life of the automotive pipes.

Now on the market many small cars usually install high-power engine "ABS" and steering system. Brake lines become more and more complex, the interference problem often occurs between the tubing and related parts, especially the installation of "ABS" parts of six bundled tubing is difficult to ensure that there is sufficient space between the tubing.

Bump and the resulting friction is a great security risk, our Adhesive Lined Heat Shrink Tube application is properly solved this problem.

Any interests please contact our Overseas Sales Manager.