Volsun®RUBLS-EPDMCold Shrink Tube
Time: 2015-05-14 13:41:33     Copyfrom: volsun

Volsun® RUBLS-EPDM Cold shrink tube is equivalent as 3M’s PST/ 8420 series cold shrink connector insulators.

Our USA customer usually purchases our RUBLS-EPDM Cold shrink tube to replace 3M’s 8420 series.

RUBLS-EPDM a series of open-ended, tubular rubber sleeves, which are factoryexpanded and assembled onto a removable core. Thecore is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal.

The RUBLS-EPDM Cold shrink tube is made of EPDM rubber, which contains no chlorides or sculptures. Various diameter sizes will cover a range of 1000 volt cables, copper and aluminum conductors. 

Diameter line extension contains two foam strips for Cold shrink insulator kits to increase diameters range for smaller cable diameters. Adhesive layer protected with liner. Stripes are 1000mm(32.3”)×40mm(1.5”).

For example, 3M 8424-7 type, our equivalent type is VE18-7, which should be equipped with one piece foam strip. Its application range is from 2.54mm to 20.9mm.