Cold Shrink Tubing For Communication Base Station Application
Time: 2016-05-12 14:15:02     Copyfrom: volsun

According to statistics, in the stability of wireless communication system, feeder transit accounts for about 40% of the entire stability of the system.One of the most common problems is that bad sealing between the connector and cable joints due to water or moisture causes poor sealing signal attenuation, VSWR alarm equipment and outdoor water alarms, thus affecting the normal transmission of the base station signal, resulting in an increase in the rate of customer complaints, higher maintenance costs, thus sealing the communication base station construction process is very important.

Cold shrink tubing is ideally suitable for small spaces and intensive joint operation, dimensional adaptability, reduce the amount of construction. In the base station construction process, it is applied to the antenna side feeder connector and waterproof seal all joints RRU side needs.

With the development of 2G-3G-4G technology, the requirements for base station antenna system is also rising, from the original protective box to the tape with clay, now and then cold shrink tube. We mustchoose a professional manufacturers for cold shrink tubing,Suzhou Volsun Electronics is the professional industrial electric supplier ,services for the Vodafone, Ericsson, Nokia Siemens, Huawei, China mobile, China Telecom and other major global communications service providers.

Any interests please do not hesitant to contact our Sales Manager.