The quick installation instruction of silicone rubber cold shrink tube
Time: 2020-12-25 10:47:45 Copyfrom: SuZhou Volsun Electronics Technology Co.,Ltd.
For the large market of 5G base stations, We are very confident that Volsun silicone cold shrink tube is currently the only product that can be installed quickly in China and it is twice as fast as its competitors.Most of the silicone cold shrink tube manufactured by domestic factories has little difference in performance, because the silicone cold shrink tube is made of special silicone rubber materials. The only difference is the installation problem. The installation instruction of our cold shrink tube are as following:
1. You need to push the cold shrink tube to the root of the joint as much as possible and then carefully pull out the supporting core
2. Push the cold shrink tube toward the root of the joint while pulling the supporting core, while observing until the cold-shrinkable sleeve is firmly contracted at the root of the joint
3. After that, do not push or pull the cold-shrinkable sleeve, otherwise it may cause unstable shrinkage or damage
More detail please contact our Sales Team by volsuntube@szvolsun.com
KEYWORD:cold shrink tube,cold shrinkable tube
RELATED_ARTICLES:
Busbar heat shrink tube for transformers and switchgears
White silicone rubber insulation heat shrink tube
Heat Shrink Tube for circuit board protection
Idetification heat shrink tube for electric motor system insulation
